The RTS 8-Port DB9 is an eight-port device server designed for network-enabling serial communications devices. When used with the included NS-Link™ driver software and a host PC, the RTS enables placement of COM or TTY ports anywhere on an Ethernet network or across the Internet. In applications where connecting legacy serial devices to a PC without software changes is a requirement, a pair of RTS units can be used to create point-to-point serial tunnels across the network that seamlessly transfer serial data via TCP or UDP socket connections.

Highlights

• No serial cable distance limitations—enables communication between a host PC and serial devices located anywhere across an Ethernet network
• Software selectable RS-232, RS-422, or RS-485—serial interfaces simplify setup and eliminate mechanical tampering associated with DIP switch products
• Application compatibility—supports native COM, TTY, or TCP/IP Socket communication modes
• Web-based configuration—makes setup and configuration changes quick and easy
• Real-time e-mail event notification—alerts administrator of potential connection and security issues
• Built-in two-port 10/100 Ethernet switch—simplifies network connection
• Rugged metal housing—enables panel and optional rack mounting
• Temperature rated for extreme conditions—operating temperature of –37° to 74°C enables RTS to function in a wide variety of harsh environments
• PortVision^® remote monitoring and management—automatically locates RTS Hub on the network enabling user to view status, update firmware, and resolve issues remotely
• Software Developer Kit—available for users interested in writing custom applications to run on the RTS platform

The RTS 16-Port RJ45 is a 16-port device server designed for network-enabling serial communications devices. When used with the included NSLink™ driver software and a host PC, the RTS Hub enables placement of COM or TTY ports anywhere on an Ethernet network or across the Internet. In applications where connecting legacy serial devices to a PC without software changes is a requirement, a pair of RTS units can be used to create a point-to-point serial tunnel across the network that seamlessly transfer serial data via TCP or UDP socket connections.

Highlights

• No serial cable distance limitations—enables communication between a host PC and serial devices located anywhere across an Ethernet network
• Software selectable RS-232, RS-422, or RS-485—serial interfaces simplify setup and eliminate mechanical tampering associated with DIP switch products
• Application compatibility—supports native COM, TTY, or TCP/IP Socket communication modes
• Built-in two-port 10/100 Ethernet switch—simplifies network connection
• Web-based configuration—makes setup and configuration changes quick and easy
• Real-time e-mail event notification—alerts administrator of potential connection and security issues
• Temperature rated for extreme conditions—operating temperature of –20° to 60°C enables RTS to function in a wide variety of harsh environments
• 1U rack mountable—provides compatibility with existing IT equipment
• PortVision^® remote monitoring and management—automatically locates RTS Hub on the network enabling user to view status, update firmware, and resolve issues remotely
• Software Developer Kit—available for users interested in writing custom applications to run on the RTS platform

The RTS 32-Port Rackmount is a 32-port device server designed for network-enabling serial communications devices. When used with the included NSLink™ driver software and a host PC, the RTS Hub enables placement of COM or TTY ports anywhere on an Ethernet network or across the Internet. In applications where connecting legacy serial devices to a PC without software changes is a requirement, a pair of RTS units can be used to create a point-to-point serial tunnel across the network that seamlessly transfer serial data via TCP or UDP socket connections.

The RocketPort uPCI 8-Port Low Profile serial port expansion card is compatible with all current 3.3 and 5.0 Volt PCI bus architectures. It's half height design enables it to be used in both standard or low profile servers. It provides eight "native" serial ports utilizing a single PCI card slot. Several external serial interface modules are available that support RS-232 or RS-422 serial communications at speeds up to 230 Kbps. Individual serial ports on the same interface can be configured for either serial protocol. External interfaces with additional surge protection are also available. RocketPort products are designed with larger transmit-and-receive buffers than those available in a standard 16550 UART found in standard PC serial ports and low-end serial cards, enabling them to handle the transmission of large amounts of data reliably and efficiently. They also utilize an on-board 36MHz processor, minimizing host CPU utilization. RocketPort products do not require the assignment of interrupts, simplifying installation and eliminating conflicts with other server cards. Drivers are available for popular operating systems.

 

The RocketPort uPCI 16-Port serial expansion card is compatible with all current 3.3 and 5.0 volt PCI bus architectures. It provides sixteen "native" serial ports utilizing a single PCI card slot and an external serial interface module sold separately that supports RS-232 or RS-422 serial communications at speeds up to 230 Kbps. Individual serial ports on the same interface module can be configured for either RS-232 or RS-422 communication. External interface modules with additional surge protection are also available. RocketPort products are designed with larger transmit and receive buffers than those of a 16550 UART found in typical PC serial ports and low-end serial cards, enabling them to handle the transmission of large amounts of data reliably and efficiently. They also utilize an on-board 36MHz processor, minimizing host CPU utilization. RocketPort products do not require the assignment of interrupts, simplifying installation and eliminating conflicts with other server cards. Drivers are available for popular operating systems.

The RocketPort uPCI 32-Port expansion card is compatible with all current 3.3 and 5.0 volt PCI bus architectures. It provides thirty-two "native" serial ports utilizing a single PCI card slot and an external serial interface module sold separately that supports RS-232 or RS-422 serial communications at speeds up to 230 Kbps. Individual serial ports on the same interface module can be configured for either RS-232 or RS-422 communication. External interface modules with additional surge protection are also available. RocketPort products are designed with larger transmit and receive buffers than those of a 16550 UART found in typical PC serial ports and low-end serial cards, enabling them to handle the transmission of large amounts of data reliably and efficiently. They also utilize an on-board 36MHz processor, minimizing host CPU utilization. RocketPort products do not require the assignment of interrupts, simplifying installation and eliminating conflicts with other server cards. Drivers are available for popular operating systems.